With this section, understand how the PaySwitcher Smart Router works to improve your conversion rates and reduces processing costs by intelligently routing payments across various processors
Prerequisites
To get started with Smart Router, ensure to have one or more payment processors integrated. You can integrate the payment processor of your choice on the Control Center by following the guide.
What is smart payment routing?
Selling globally or otherwise invariably brings in a requirement to adopt multiple payment processors to cater to a wide range of payment method needs of the customers and gives you the flexibility to switch between processors to manage down-time and , it could be vital to optimising your payment processing costs as your business can choose the most optimal payment processors for every payment based on the cost, region and customer.
Hence, PaySwitcherâs smart router is designed as a no-code tool to provide complete control and transparency in creating and modifying payment routing rules. PaySwitcher supports below formats of Smart Routing.
Volume Based Configuration: Define volume distribution among multiple payment processors using percentages.
Rule Based Configuration: More granular control which allows to define custom routing logics based on different parameters of payment.
Default Fallback Routing : If the active routing rules are not applicable, the priority order of all configured payment processors is used to route payments. This priority order is configurable from the Dashboard.
Cost Based Configuration (submit a feature request ): Automatically routes transaction to the payment processor charging the least MDR (merchant discount rate) for the opted payment method.
How does the Smart Router work?
PaySwitcher Smart Router Engine evaluates every payment request against your predefined routing logic and makes a decision on the best payment processor for the payment, and executes the transaction. If the payment fails or if the payment processor is down, the payment is automatically retried through a different processor.
How to configure the Smart Router?
Next step
FAQs
1. What parameters can I use to configure routing rules?
The rule-based routing supports setting up advanced rule configuration based on all critical /payments parameters such as Payment Method, Payment Method Type, Country, Currency, Amount etc.
2. Why did my payment go through 'Y' connector even though I have specified 'X' in my routing configuration? OR Why is it showing me 'Abc' payment method in SDK checkout even though I have not enabled it for the 'X' connector that I'm routing my payments through?
There can be multiple reasons why this happened but all of them can be boiled down to a "connector eligibility failure" for a given payment. We'll walk through a common scenario to examine what this really means.
Imagine that you configured two connectors for your account. Say Stripe, then Adyen, in that order. Since you configured them in that order, your default fallback looks like this: [Stripe, Adyen] (connectors are appended to the end of your default fallback list when configured for the first time)
In your connectors dashboard, you enable Cards for Stripe, and ApplePay for Adyen.
Now you create a new Volume-based routing configuration, and you configure it to route 100% of your traffic through Stripe for now.
Now you go ahead and open up the PaySwitcher SDK to make a test payment. In the payment method selection area, you can see two buttons, one for Cards and one for ApplePay.
This is where you run into your first question. "Why is it showing me ApplePay even though I have configured 100% of my payments to go through Stripe, and ApplePay is not enabled for Stripe?"
The answer to this is, the payment methods that are shown to the customer in the SDK aren't conscious of your routing configuration. We prioritize giving your customers the complete spread of all enabled payment methods across all of your enabled connectors. Therefore, if you specifically do not wish for ApplePay to appear on your checkout screen, you need to disable it in Adyen here, even though your routing configuration makes no mention of Adyen.
Now you select ApplePay, go through the required steps, confirm the payment, and it succeeds. You go to your payments dashboard and see that the payment went through Adyen.
This is where you run into the second question. "Why is the payment going through Adyen even though I have set my routing configuration to route 100% of my payments through Stripe?
The answer to this carries over from the previous point. Since we displayed ApplePay on the checkout screen even though it wasn't enabled for your preferred connector Stripe, we need to adhere to your connector payment method configuration and ensure the payment goes through the right connector, here, Adyen since ApplePay is only enabled for Adyen. To briefly explain how PaySwitcher reaches this conclusion :-
PaySwitcher runs your configured routing algorithm. Since this is 100% Stripe, PaySwitcher receives Stripe as the outuput.
PaySwitcher then runs an Eligibility Analysis on the output (Stripe) to gauge its eligibility for the current payment. The Eligibility Analysis fails once PaySwitcher realizes that the payment is made through ApplePay which is not enabled for Stripe
The application then goes into fallback mode and loads your default fallback, which is [Stripe, Adyen] as seen earlier.
The application looks through the list in order. It ignores Stripe since it has already failed the Eligibility Analysis. It instead subjects Adyen (the next connector in the list) to the same Eligibility Analysis.
This time the analysis passes since ApplePay is enabled for Adyen.
PaySwitcher takes Adyen as the final connector to make the payment through even though your configuration says 100% Stripe.
This fallback flow is taken when none of the connectors in the output of routing are eligible for the payment. This is done in an effort to maximize the success rate of the payment even if it means deviating from the currently active routing configuration.
provides a simple, intuitive UI to configure multiple Routing rules on your dashboard under the Routing tab. There are three routing rule formats that PaySwitcher currently supports.
\
To test the Smart Router, after activating one rule, we can make a Test Payment using the
